Willy WS-8450, Руководство по эксплуатации

Страница: 27 / 38

25
3.5.4 Manual cut

Warming: Please remember to start spindle when execute manual cutting.
Cutting process:
1. cut one single line along X axis 1200mm
1) Rotate blade to 0 degree, move it to position A ;
2) Set cutting “ Distance ” 1200
3) Start spindle
4) Press .
Machine start, Z axis feeds to top of table, then cuts along X axis. Cutting length is 1200.
X axis and Z axis back to position A after cycle finishing.
2. Cut one single line along Y axis 1100mm.
1) Rotate blade to 90 degree, move it to position B ;
2) Set cutting “ Distance ” 1100
3) Start spindle
4) Press .
Machine start, Z axis feeds to top of table, then cuts along Y axis. Cutting length is 1100.
Y axis and Z axis back to position B after cycle finishing.
3. Feed directly.

Press X+ or X- when head at 90 degree, machine feed along x axis directly without
1
1
00
m
m
A
1200mm
B