Willy WS-8450, Руководство по эксплуатации

Страница: 21 / 38

19
3.5 Example
3.5.1 Cut of X axis

Material size: 2000*1600

Product size: 2000*400, 2000*300 (2pieces), 2000*500.
Parameter setting:
1) Set the size (“ width ” and “ pieces ”) ( 1 ) of product. 400mm-1psc, 300mm-2psc, 500mm-1psc.
2) As the diameter of blade is 470mm. Set “ X axis cutting length ” ( 2 ) 250-400mm larger than
length of product. We can adjust cutting length when auto cycle run, system reads this
parameter real time. Here we set cutting length
2400 mm.
3) Move blade to the top of wood table. Press to auto measure the value of Z axis,” Z-
limit location value ” ( 3 ).

Set the data to a large negative value before moving blade to top of wood.
A
1
2
3