WH-2800 SERIES
PATIENT CARE UNITS
INSTALLATION & OPERATION MANUAL
PAGE
11
© Rev.
9/2022
1.800.428.4065
TOLL FREE
| www.willoughby-ind.com
INSTALLATION INSTRUCTIONS (CONT.)
Step 7:
Install Faucet and Connect Water Supply
NOTE: Please refer to faucet manufacturer’s recommended installation instructions.
Step 8:
Completing Installation
1.)
Connect the flush valve outlet to the water closet.
NOTE: Tighten all flush valve connections.
2.)
Connect the flush valve water supply pipe to the flush valve 1” NPT inlet.
3.)
Install Push Button Actuator plastic tubing.
4.)
Install the P-trap (supplied by installer) to the sink drain, and then connect the P-trap to the
drain pipe (piping supplied by installer).
5.)
On models with a bedpan washer sprayer, connect sprayer hose to vacuum breaker outlet
inside cabinet.
6.)
Check all water and waste connections for leaks.
