WILLIAMSWARN kegerator, Руководство пользователя

Страница: 4 / 8

Beer Font
Beer Line
Ball Lock
Disconnect
Gas Line
Cornelius Kegs
CO
2
Regulator
CO
2
Gas Cylinder
Ball Lock Disconnect
5 4
USER MANUAL
KEGERATOR
TYPICAL SINGLE TAP
INSTALLATIONS
The following diagrams illustrate a
single typical single tap installation.
FOR BREWKEG™ AND CORNELIUS KEGS
CORNELIUS KEGS
The beer line that is attached to the beer font
connects to the ‘Out’ port on your Cornelius
Kegs. It will not be able to be attached to the
in port. You have the ability to connect up to
two Cornelius Kegs at one time. The Gas Line
connects to the “In” port on your Cornelius
kegs and you can connect up to two Cornelius
kegs at one time. Show close up photo of the
difference between the two fittings so they
know which is the in port and out port.
BREWKEGS™
The beer line that is attached to the beer
font connects to the beverage out port on
your BrewKegs™. It will not be able to
be attached to the in port. You have the
ability to connect up to two BrewKeg10™
or one BrewKeg25™ at one time. The
Gas Line connects to the gas in port on
your BrewKegs™ and you can connect
up to two BrewKeg10™ or one BrewKeg25™
at one time. See diagrams below.
BREWKEG10
TM
BREWKEG25
TM
/ BREWKEG50
TM
BEVERAGE-OUT PORT
(WITHOUT NOTCHES ON ITS BASE HEX,
WITH TUBE EXTENDING INTO THE VESSEL)
BK10 LID
VARIABLE PRESSURE
RELIEF VALVE VPRV
GAS-IN PORT
(WITH NOTCHES ON ITS BASE HEX)
LID GAS-IN PORT PRESSURE GAUGE
BEVERAGE-OUT PORT
VIEWING PORTS
VARIABLE PRESSURE RELIEF VALVE (VPRV)