background image

Printed on 100 % recycled paper 

 

11/13 

Oil Furnaces 

PLB-098 LOW-BOY

 

 

KEEP THESE INSTRUCTIONS 

WITH FURNACE FOR FUTURE 

REFERENCE.

Furnace Manual 

 

Contents

 

Page

 

 

Read this first! ............................................................................ 2 

1.

 Installation.................................................................................. 3 

2.

 Operation ................................................................................. 11 

3.

 Maintenance ............................................................................ 12 

4.

 Checkout 

procedure................................................................. 14 

5.

  Dimensions and Ratings .......................................................... 16 

6.

  Components and replacement parts........................................ 21 

7.

 Owner’s 

information ................................................................. 25 

 

 

Hazard definitions 

Hazards that 

will cause severe

 personal injury, 

death or substantial property damage. 
 
Hazards that 

can cause severe

 personal injury, 

death or substantial property damage. 

 

 

 
 
 
 
 

 
 
 

Do not store or use gasoline or other flammable 
liquids or vapors near this furnace or any other 
appliance. 
Ventilate house while operating furnace for the first 
time. Odors may be emitted for a brief period. 
 
Do not alter this furnace in any way. The 
manufacturer will not be liable for any damage 
resulting from changes made in the field to the 
furnace or its components or from improper 
installation. Failure to comply could result in severe 
personal injury, death or substantial property 
damage. 

Hazards that 

will or can cause minor

 personal 

injury or property damage. 
 
Special instructions on installation, operation or 
maintenance that are important but not related to 
personal injury or property damage. 

 

 
 
 
 
 
 
 
 
 
 
 

This manual must only be used by a 

qualified 

heating installer / service technician.

 Furnace and 

burner must be installed and serviced only by a 
qualified heating installer / service technician. 
Failure to comply could result in severe personal 
injury, death or substantial property damage. 

 

When calling or writing about the furnace – Please 
indicate furnace model number and serial number 
from rating label. You may list the serial number and 
model number in the space provided on the 
“Installation and service certificate” found on page 
15. 

If your furnace is shut down during the cold weather season, water pipes may freeze, burst and cause serious water 
damage. Turn off the water supply and bleed the pipes 

If the heater is left unattended during the cold weather season, take the following precautions: 
Close the main water valve in the house and purge the pipes if possible. Open all the faucets in the house; 
Ask someone to frequently check the house during the cold weather season to make sure that there is sufficient heat to 
prevent the pipes from freezing. Tell this person to call an emergency number if required. 

USER

 – Please read the following. Failure to 

comply could result in severe personal injury, death 
or substantial property damage. 

 

This manual is for the sole use by your 
qualified heating installer / service 
technician. 

  Please see the 

Owner’s information

 only, on 

the back page of this manual. 

  Have the furnace serviced by a qualified service 

technician, at least once a year. 

INSTALLER 

– Read all instructions before 

installing. 

Read page 2 first.

 Follow all 

instructions in proper order to prevent personal 
injury or death. 

 Consider ducting, fuel supply, venting and 

installation when determining furnace location. 

  Any claims for damage or shortage in shipment 

must be filed immediately against the 
transportation company by the consignee.

 C    

US 

Содержание PLB-098 LOW-BOY



























Отзывы: