background image

ENGLISH

ENGLISH

14

15

WILLIAMSJETTENDERS.COM

WILLIAMSJETTENDERS.COM

As part of its pre-delivery inspection your 

new Sportjet has been fully tested and 
drained of fuel.

• 

Ensure ignition is in OFF position.

• 

 Remove seat cushion to expose filler cap 

(460 & 520 only).

• 

Re-fuel in a ventilated area.

• 

 Do not overfill the tank; be careful not to 

spill fuel.

• 

Tighten fuel cap securely after re-fuelling.

• 

 Open engine hatch and inspect bilges after 

re-fuelling.

• 

The filler cap has an integral breather.

Do NOT hose around the fuel filler area as 

water may enter the fuel tank.

 

MINIMUM OCTANE RATING

CAUTION.

 

Do not use fuel from fuel 

pumps labeled E85.

 Use of fuel labeled 

E15 is prohibited by US EPA Regulations.
Fuel containing Ethanol can result in problems 

in the fuel system and engine, resulting in:

• 

Starting and operating difficulties.

• 

Deterioration of rubber or plastic parts.

• 

Corrosion of metal parts.

• 

Damage to internal engine parts

Consult your Rotax engine operator’s manual.
A break-in period of 10 hours is required 

before continuous operation at full throttle.  

To achieve a good break-in, a maximum of 

3

/

4

 throttle should be observed, however, brief 

acceleration and speed variations contribute 

to a good break-in. Williams suggest that after 

the first 10 hours of operation, the engine be 

checked by an authorized BRP/JPS ROTAX 

marine engine dealer. 

The break-in period is very important and 

must not be neglected.

Controls and Instrument Cluster 

Sportjet 345, 395 & 435

1

  Gauge display

2

   Bilge blower button

3

   Bilge pump button

4

   Navigation lights button

5

   Automatic tube inflation switch  

(if fitted) 

6

  Key switch

7

  Kill cord

8

   Steering wheel tilt lever  

Picture shows wheel tilted down.

9

  Music In socket (USB – if fitted)

10

  12v auxiliary power socket

11

  Throttle/shift control

12

  Gauge mode switches

Sportjet 460 & 520

1

  Gauge display

2

  Gauge mode switches

3

   Boat function control switches

4

  Engine start/stop button

5

   Music In socket (within glovebox)

6

  Key switch

7

  Kill cord

8

  Throttle/shift control

9

   Tilting/removable steering wheel

The helm assembly can be  

folded if there is a height restriction.

WARNING.

 

The area  

under the helm

 should 

not be used for storage under 

any circumstances. 

7

10

11

2

4

5

3

12

8

1

6

9

Fuelling

New Engine Break-in Period

North America

Rest of the World

RON+MON/2:

87

91

RON:

92

95

900 (ACE)

•*

900 (ACE)

•*

150 (ECT)

-

150 (ECT)

-

250 (ECT)

•*

250 (ECT)

•*

For optimum engine performance

7

9

3

5

6

1

8

2

4

Содержание SportJet 345
















Отзывы: