12
OWNER'S MANUAL
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the level of the
split volume (0-127).
To Change The Split (Left Hand) Voice Note
Press and hold the Split button while
depressing the desired Voice Select button.
Change The Main (Right Hand) Voice
1. Press voice buttons will Select the new voice.
To Change the Split Point
Hold the Split button and then press a key on
the keyboard to determine the split point.
You can also change the split point with the
Function Mode.
1. Press the Function button.
2. Turn the Value Dial to select split point edit
menu, the display will show “S .P:xx”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the split point
(A-1 to C-7).
To Change the Split (left hand) Octave
1. Press and hold the [Octave] button, 2 seconds
later the LCD will display “Split Oct”.
2. When the display is on the split octave
screen, turn the Value Dial to change Split
Octave (-1 or +1).
To Turn Off Split Mode
Press the Split button. The LED will turn off as
well as the currently selected voice.
TUNING
To Change Global Tuning
1. Press the Function button.
2. Turn the Value Dial to select the Tune edit
menu. The display will show “Tune a1”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the Tuning (the
range is 415Hz to +466Hz).
EFFECTS
The Reverb and Chorus effects may be applied
to each voice individually and will be retained
even when the power is turned off.
1519833 Williams Rhapsody 2 Manual.indd 12
6/5/15 2:50 PM
