11
RHAPSODY 2 DIGITAL PIANO
WILLIAMSPIANOS.COM
RECORDING
Recording Your Own Song
You can record one user song with two tracks in
the Rhapsody 2.
1. Press the Track Button and select which track
you want to record to with the Value Dial.
2. Press the Play and Track buttons together to
start recording. Once you start playing, the
display will show a small dot on the screen to
indicate that you are waiting to record. Then,
when you play the keyboard or press the
Play button, the display will show four small
dots on the screen to indicate that you are
recording.
3. Press the Play and Track buttons together
again or press Play only to stop the recorder.
Then, press Play only to hear your song.
4. Repeat the steps above to record to the
other track.
Layer Mode
To layer two sounds, press the corresponding
voices simultaneously. Both voice LEDs will
light up to indicate that they are layers.
To layer two sounds from the second bank,
simply make sure the variation button is lit
and then press the corresponding voices
simultaneously.
To layer two sounds in different banks, press
and hold simultaneously the instrument
in the first bank and the variation button.
The variation button LED will blink and the
first instrument button will be lit. Once the
variation button is blinking, select the layered
instrument from the second bank by pressing
the corresponding Instrument button. Once
selected, this button will blink to indicate that
it is from the second bank while the instrument
from the first bank stays lit. If one voice is
selected from each bank, but they share the
same button, the instrument button will blink.
To return to normal, single voice mode, press a
single Voice button.
To Change The Layer Volume Level
1. Press the Function button.
2. Turn the Value Dial to select the Layer
Volume Level edit menu, the display will
show “D .Volume”.
3. Press the Function button again to enter
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the level of the
layer volume (0-127).
SPLIT MODE
Split Mode allows the keyboard to be divided
into two sections so that different voices may
be played with the left and right hands. The
volume may be independently adjusted for each
voice, the Split Point (the highest note played
with the left hand) may be adjusted and the
Split Voice may be changed as desired.
To Enter Split Mode
Press the [SPLIT] button.
The Split (left hand) voice will be the Acoustic
Bass and the last Split Point used.
To Change The Split Volume
(Upper And Lower)
1. Press the Function button.
2. Turn the Value Dial to select the Split Volume
Level edit menu, the display will show
“S .Volume”.
1519833 Williams Rhapsody 2 Manual.indd 11
6/5/15 2:50 PM
