background image

8

LIMITED LIFETIME WARRANTY

J.H. Williams Tool Group warrants this product to be free from defects in material and workmanship for the life of the 

product as long as the original purchaser owns the product. The warranty is non-transferable and is subject to the terms, 

exclusions, and limitations described below:

•   Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or 

couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and 

Williams will not provide any warranty credit for such damaged components.

•   This warranty does not cover ordinary wear and tear, overloading, alterations (including repairs or attempted repairs not 

performed by Williams or one of its authorized personnel), improper fluid use, or use of the product in any manner for which 

the product was not intended or the use of which is not in accordance with the instructions or warnings provided with the 

product.

•   In the unlikely event that a Williams product fails due to material defect in workmanship, you may contact J.H. Williams 

Tool Group for disposition. In such cases, the customer’s sole and exclusive remedy for any breach or alleged breach 

of warranty is limited to the repair or replacement of the defective product.

•   Under no circumstances is Williams liable for any consequential or incidental damage or loss whatsoever.

•   THIS WARRANTY IS LIMITED TO NEW PRODUCTS SOLD THROUGH AUTHORIZED DISTRIBUTORS AND OTHER 

CHANNELS DESIGNATED BY WILLIAMS. NO AGENT, EMPLOYEE OR OTHER REPRESENTATIVE OF WILLIAMS 

IS AUTHORIZED TO MODIFY THIS WARRANTY.

•   THE FOREGOING IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, 

INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A FITNESS 

FOR A PARTICULAR PURPOSE.

•   Components not manufactured by Williams including certain motor systems, gasoline engines, and other are not covered 

by this warranty and instead are covered by the manufacturer’s separate manufacturer’s warranty provided in the 

package.

•   Williams’ liability in all cases is limited to, and will not exceed the purchase price paid for the product.

Содержание 6CA30T02









Отзывы: