Williams Sound Whisper R863 Скачать руководство пользователя

Страница: 19 / 20

earinG

elPer

™

T800 T

ransMiTTer

Dimensions:

21.8 cm (8.6”) W x 21.8 cm (8.6”) D x 4.6 cm (1.8”) H

Weight:

1.32 kg (2.9 lbs)

Color:

Black with white legends

Power:

AC: 100 to 240 VAC, 50-60 Hz, 400 mA, power inlet IEC C14

DC: 12 to 13 VDC, 800 mA, 2.1 mm DC input jack

Power Switch:

Push ON - push OFF switch with red light

Temperature Range: Operating: 0 C to 40 C (+32 F to 104 F)

Storage: -20 C to 70 C (-4 F to +158 F)

Operating Frequencies: Selectable: Ch 1= 863.250 MHz, Ch 2 = 863.750 MHz,

Ch 3 = 864.750 MHz,

13 other frequencies available (see manual)

RF Output:

5 to 10 dBm (full power switch)

RF Switch:

Low/ Full power switch on rear panel

LCD Display:

Backlit, Ch #, frequency, user name, audio level VU

(indicated by 11 segments total)

Menu Push Buttons: Menu, +Ch select, -Ch select, SET

Headphone Output: Mono, 1/4” tip barrel jack, 0.35mW power into 33 ohms, level

adjust on front panel

Stability:

+/- .05 MHz (0 C to 40 C)

FM Deviation:

45 kHz (line input, L+R, 1 kHz, 0.5 Vrms)

Pre-Emphasis:

50 µsec

Nominal Range:

Up to122 meters (400 ft.) at RF switch full power with

Williams Sound R863 receiver

Frequency Response: Line input: 25 to 10.0 kHz +- 3 dB

Microphone input: 110 to 8.5 kHz +/- 3 dB

Signal/Noise Ratio (1 KHz): Line input: > 50 dB

Microphone input: > 40 dB

%THD + noise (1 KHz): Line input: < 0.4%

Microphone input: < 0.5%

Audio Processing: 2:1 compression (line or microphone input)

Audio Input:

Line input: mono, RCA jack x 2 (labeled left and right)

Microphone input: Balanced/ unbalanced, combo XLR (3 pin)

or 1/4” TRS jack.

Audio Levels:

(at FM deviation)

Line input: 0.5 Vrms (-6 dBV), rotary gain adjust rear panel at

maximum

Microphone input: 10 mVrms (-40 dBV), rotary gain adjust

rear panel at maximum

Common Mode Rejection: Microphone input: > 22 dB @ 1 kHz, balanced input

Antenna:

22.9 cm (9”) long, semi flexible, adjustable, removable, rear

panel connector

Compatible Receivers: R863

Approvals:

CE, RoHS, WEEE, ETSI EN 301 357-1, 2

Warranty:

3 years (excluding accessory products)

NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!

Содержание Whisper R863





















Результаты поиска

Содержание Whisper R863

Отзывы:

Похожие инструкции для Whisper R863

Бренды по названию

Популярные бренды

Williams Sound Whisper R863, Руководство пользователя и инструкция пользователя

Результаты поиска

Содержание Whisper R863

Отзывы:

Похожие инструкции для Whisper R863

Бренды по названию

Популярные бренды