Williams Sound TGS 200, Инструкция по установке и Руководство пользователя

Страница: 6 / 15

Williams Sound
®
Helping People Hear
7
O
PERATING
I
NSTRUCTIONS
U
SING
T
HE
T1-216 T
RANSMITTER
Note: Rechargeable batteries are shipped in a discharged state and must be charged
overnight before using.
1. Make sure there are two charged AA batteries in the transmitter. If batteries are not
installed, see Battery Information on page 10.
2. Plug the microphone cord into the “Mic” jack on top of the transmitter.
3. Place the transmitter in the belt clip case provided.
4. Turn the power switch on top of the transmitter to “On.”
5. Position the Headset Microphone boom as close to the wearer's mouth as possible
without actually touching. Lapel Clip microphones should be attached to a collar or
lapel, as close to the wearer's mouth as possible.
Note On The Transmitter Antenna:
The microphone cord is the transmitting antenna. Do not bunch up the cord, wrap it tightly
around your body, or wrap it around the transmitter. For maximum range, the cord should
hang as straight as possible. The transmitter can be placed in a pants pocket, or clipped onto
a belt or waistband. Make sure the transmitter is turned OFF when not in use.
Mic
Williams Sound FM
Off On
FM
On/Off Switch
Mic
Jack
ON Indicator
F
IG
. 2: T1-216 T
RANSMITTER
T
OP
V
IEW