Williams Sound TGS 200, Инструкция по установке и Руководство пользователя

Страница: 11 / 15

Williams Sound
®
Helping People Hear
12
I
N
C
ASE
O
F
D
IFFICULTY
If your Tour Guide System is not working, check the following:
1. Make sure the batteries are fresh or completely charged and that the “plus” and “minus”
terminals are installed correctly.
2. If the rechargeable batteries will only work for a short period of time (less than 1 hour)
even after they are fully charged, they must be regenerated. Leave them in the receiver or
transmitter with the unit turned on, for 5 - 6 hours. Then turn receiver or transmitter off,
place it in the charger, and charge for 14 - 16 hours. This should restore normal battery
life. Rechargeable batteries will gradually lose their capacity over time and should be
replaced every year.
3. Make sure the microphone is plugged into the T1-216 Transmitter and the headphone is
plugged into the R1-216 Receiver.
4. Move the transmitter and receiver closer together. You may be out of range. When using
the system indoors, it’s normal for the signal to momentarily disappear in certain
locations. This is called a “drop-out.” Moving a few feet will restore the signal.
5. Do not try to use more than one transmitter on the same channel in close proximity to
each other. MORE THAN ONE TRANSMITTER ON THE SAME CHANNEL WILL
RESULT IN INTERFERENCE IF THEY ARE CLOSE TOGETHER. Keep the systems
at least 50 meters apart or use separate channels for each system used.
6. If you are still hearing interference on the receivers, turn the transmitter off and listen
with a receiver. If you hear the interference with the transmitter off, you need to change
to a clear channel. Call your Williams Sound at 1-800-328-6190 for details.