Williams Sound PPA R38 Скачать руководство пользователя страница 3

3

PPA R38 FM Receiver

Safety Warnings

HeARing SAfety 

CAUtiOn!

This receiver is designed to amplify sounds to a high volume 
level, which could potentially cause hearing damage if used 
improperly. To protect your hearing and the hearing of others:

1.  Make sure the volume is turned down before putting on the 

earphone or headphone—only then adjust the volume to a 
comfortable level. 

2.  Set the volume level at the minimum setting that you need to 

hear. 

3.  If you experience feedback (a squealing or howling sound), 

reduce the volume setting and move the microphone away 
from the earphone or headphone. 

4.  Do not allow children or other unauthorized persons access to 

this product. 

BAtteRy SAfety And diSPOSAl 

CAUtiOn!

This receiver may be used with non-rechargeable alkaline batteries. 
Do not attempt to recharge non-rechargeable batteries; they may 
explode, release dangerous chemicals, cause burns, or cause other 
serious harm to the user or product. 

This receiver can be used with, and recharge, NiMH Batteries. To 
reduce the risk of fire or burns, do not attempt to open, disassemble, 
or service NiMH batteries.  Do not crush, puncture, short contacts 
or  dispose  of  in  fire  or  water.    Do  not  incinerate  or  expose  to 
temperatures above 140F (60C).  Replace only with battery type 
designated for this product.  Recycle or dispose of properly.  

Do not attempt to charge this receiver with any charger other than a 
Williams Sound compatible charger.  When charging NiMH batteries 
in the receiver, the battery switch must be in the “NiMH” position.

PACemAkeR SAfety 

CAUtiOn!

If you have a pacemaker or other medical device, make sure that 
you are using the receiver in accordance with safety guidelines 
established by your physician or the pacemaker/medical device 
manufacturer.

Servicing or attempting to service this device will void 
the warranty

Refer servicing to qualified personnel at Williams Sound.

Recycling instructions

Help Williams Sound protect the environment!  Please take the 
time to dispose of your equipment properly.

Product Recycling Instructions:

Please do NOT dispose of your Williams Sound equipment 
in the household trash.  Please take the equipment to an 
electronics recycling center; OR, return the product to the 

factory for proper disposal.  

Battery Recycling Instructions:

Please do NOT dispose of used batteries in the 
household trash.  Please take the batteries to a retail or 
community collection point for recycling.

Receiver Applications

· Tours

· Schools

· Hearing Assistance

· Conference Rooms

- Languange Interpretation

important note about Oled Care

The PPA R38 must be powered off before removing the batteries.  
Failure to do so may decrease the life of the OLED display.

Содержание PPA R38













Отзывы: