Williams Sound PFM SYS A, Инструкция по эксплуатации

Страница: 6 / 9

PFM R7 & R16 Receiver Tuning
Tuning Coil
receiver to listen for the transmitter signal while
you slowly and gently rotate the tuning slug
inside the tuning coil with the tuning wrench.
Adjust the tuning coil slowly and carefully. Do
not press down on the tuning slug. Adjust for
maximum signal.
5. Re-tune all the receivers and mark the new fre-
quency inside the case for future reference.
Rechargeable Batteries
The PFM 100 and PFM 200 System utilize a special
rechargeable Ni-Cad 6 volt battery (BAT 021)
designed to operate the systems for approximately 10
hours on an overnight charge. The batteries are
charged using a single battery charger (BAT 005) or a
multiple battery charger case (CHG 1269A) which
charges up to 12 receivers or transmitters.
Note: These units will not accept any other battery.
To Charge Batteries
1. Make sure both the Transmitter and Receiver are
turned off.
2. Plug the charger cord into the "MIC/CHARGE"
jack on top of the Transmitter.
3. Plug the second charger cord into the
"EAR/CHG" jack on top of the Receiver.
4. Plug the chargers into a wall outlet and charge for
12 hours.
The charge indicator light on the chargers should be
lit while the Transmitter and Receiver are charging. It
is okay to leave the Transmitter or Receiver charging
for extended periods of time.
Using Your Personal FM System
with a Hearing Aid
If you have a hearing aid equipped with a Telecoil (T-
Switch), you can use a Neckloop (NKL 003–chil-
dren’s size, or NKL 001–adult’s size) or Silhouette
coil (INC 005 WC) to magnetically couple the signal
from the PFM Receiver into your hearing aid. The
Neckloop plugs into the earphone jack of the receiv-
er. Turn the switch to the “T” position on your hear-
ing aid and adjust the volume control on the receiver
6 6