in
poor system range and excessive "dead spots." See the instructions on
page 14. If the system mutes and the RF indicator light goes out, it
BOX 13: Enter ".2" on the first line. (Area of operation ... is .2 miles
radius of station A.) Fill in the next two lines with the
latitude and longitude of your location in degrees and
minutes. Fill in 00" for seconds. A local library can supply
this information. For example:
Degrees Minutes
Seconds
Direction
Latitude
42 27 00 N
Longitude
98
15 00 W
BOX 14: Enter the street address of your facility on line A.
BOX 15: Enter your city on line A.
BOX 16: Enter your county on line A.
BOX 17: Enter the two-letter abbreviation for your state on line A.
BOX 18: Enter the street address, city, state, and telephone number
where a person responsible for system operation may be
reached. You must fill this in, even if it is the same
information as above.
BOX 19: Skip
BOX 20: Enter "IB".
BOX 21: Enter the legal name of the person, business, or
organization applying for the license.
BOX 22: Enter the mailing address to which the license and any
further correspondence should be mailed. Fill it in
completely, even if it is the same as the address above.
BOX 23: Enter the city name for the license mailing address.
BOX 24: Enter the two-letter state abbreviation.
BOX 25: Enter the ZIP Code for the license mailing address.
BOX 26: Enter an "X" in the "NO" Box on the first line.
BOX 27: Enter 28, 29: Skip.
BOX 28: Enter an "X" in the box that best describes your
organization.
BOX 31: Enter "90.75A" in the small box marked "Give Rule
Section" inside of BOX 31. Also enter a short, clear
statement that includes a general explanation of your
business or activity and how the Transmitter will be used.
BOX 32: Enter an "X" in the "New Station" box.
BOX 33: Enter an "X" in the "Yes" box.
BOX 34: Enter an "X" in the "No" box.
BOX 35, 36: Skip.
BOX 37: Enter the name and phone number of the person
completing this form. Fill this in completely, even if you
are duplicating information.
26
