The pitch of the Symphony is automatically set to standard A440 pitch when the piano is turned on. The tuning
feature makes it possible to tune the pitch of the instrument in fine intervals. Tuning can be accomplished over a
range of +/–1 semitone in +/–64 steps.
1. Press the
FUNCTION
button.
2. Press the
PAGE UP
or the
PAGE DOWN
buttons until the “Master Tune” menu appears.
3. Press the
+/YES
button to show the tuning value.
4. Use the
+/YES
button to increase the value or the
–/NO
buttons to decrease the value. Press the
+/YES
,
–/NO
buttons simultaneously to recover the default setting of 00.
5. Press the
FUNCTION
button again to exit the function setting mode.
Master Tune
When the
HARMONY
button is engaged, a single note on the right-hand section of the keyboard will be
heard with additional auto harmony notes when the auto accompaniment is playing. There are four types of
harmonies that can be selected.
Duet
adds a harmonizing note sounding below the single right-hand note that you supply when the chord
accompaniment is playing.
Close harmony
adds two harmonizing notes sounding below the single right-hand melody note that you supply
when the chord accompaniment is playing.
Open harmony
adds several harmonizing notes when the chord accompaniment is playing.
Octave
adds a note one octave below the note in the right-hand section of the keyboard when the
chord accompaniment is playing.
1. Press the
FUNCTION
button, then the
+/YES
button to confirm.
2. Press the
PAGE UP
or the
PAGE DOWN
buttons until the “Harmony Type” menu appears.
3. Press the
+/YES
button to confirm your selection. The current harmony type will be shown.
4. Use the
+/YES
or
–/NO
buttons to select a harmony type.
5. Press the
FUNCTION
button again to exit the function setting mode.
Auto Harmony Type Selection
25