The Function mode is used to set up or to adjust various parameters related to the operation of this keyboard.
With the
FUNCTION
button engaged, you may access the menu for the Reverb level, Chorus level, Touch
sensitivity, Lower Split point for voice, Split point for auto accompaniment, master tuning, the Drum Kit
selection, and Harmony type selection.
Functions
Reverb simulates the effect of playing in a big room or hall where the sound reverberates off the walls and
ceiling. The reverb effect is engaged automatically when the power is turned on. You can switch the reverb
feature on and off by pressing the
REVERB
button. Select the level of reverb from the Function menu.
1. Press the
FUNCTION
button.
2. Press the
PAGE UP
or the
PAGE DOWN
buttons until the “Reverb Level” menu appears.
3. Press the
+/YES
button and the current reverb level will be shown.
4. Use the
+/YES
button to increase the reverb level or the
–/NO
buttons to decrease the level. The number pad
can also be used to directly enter a value ranging from 01-16. Press the
+/YES
,
–/NO
buttons simultaneously
to recover the default setting of 12.
5. Press the
FUNCTION
button again to exit the function setting mode.
Reverb Level Setting
22