Wilks USA RX525i, Руководство по эксплуатации

Страница: 4 / 18

3
WARNING!
SERVICING OF A DOUBLE-
INSULATED MACHINE
In a double-insulated machine, two
systems of insulation are provided instead
of grounding. No grounding means are
provided for a double-insulated machine,
nor should grounding means be added to
the machine. Servicing a double-insulated
machine requires extreme care and
knowledge of the system, and should be
done only by qualified service personnel.
Replacement parts for a double-insulated
machine must be identical to the original
parts. A double-insulated machine is
marked with the words
“Double Insulation
"or
“Double Insulated.” Machine may also
be marked with symbol shown in Figure
1.
WARNING! Do not use pressure that
exceeds the operating pressure of any of
the parts (hoses, fittings, etc.) in the
pressurized
system. Ensure all
equipment and accessories are rated to
withstand
the maximum working
pressure of the unit.
WARNING! Explosion hazard.
Never spray flammable liquids or use
pressure washer in areas containing
combustible dust, liquids or vapors. Never
operate the machine in a closed building
or in or near an explosive environment.
WARNING! Do not spray electrical
apparatus and wiring.
• Never disconnect the high pressure
discharge hose from the machine while the
system is pressurized. To depressurize
machine, turn power and water supply off,
then press gun trigger 2~3 times.
• Never permanently engage the trigger
mechanism on the gun.
• Never operate the machine without all
components properly connected to the
machine (handle, gun/wand assembly,
nozzle, etc.).
WARNING!
Equipment damage.
• ALWAYS turn water supply “ON” before
turning pressure washer
“ON.” Running
pump dry causes serious damage.
• Do not operate the pressure washer with
the inlet water screen removed. Keep
screen clear of debris and sediment.
• NEVER operate pressure washer with
broken or missing parts. Check equipment
regularly and repair or replace worn or
damaged parts immediately.
• Use only the nozzle supplied with this
machine
• Never attempt to alter factory settings.
Altering factory settings could damage the
unit and will void the warranty.