Wilfa TK-1200B, Руководство по эксплуатации

Страница: 41 / 44

9
English
English
4. Lift the kettle from the power base, press the lid lock and pour the water.
Note: Use caution when pouring the water from your kettle and do not open the
lid, as boiling water will scald.
5. The water can be kept warm by the vacuum layer between inner cavity and
enclosure. No electricity is used.
6. Unplug the appliance while it is not in use, dry and clean it, and then place it on
the base.
Boil-dry Protection
Should you accidentally allow the kettle to operate without water, boil-dry
protection will automatically switch it off. If this occurs, allow the kettle to cool
before filling with cold water and re-boiling.
Cleaning & Maintenance
1. Always disconnect the kettle from the power outlet before cleaning. Never
immerse the kettle or power base in water, or allow moisture to come into
contact with these parts, in case of electric leakage.
2. Exterior cleaning: wipe over the exterior of the kettle with a soft damp cloth, and
then wipe dry with a dry cloth.
Note: Do not use chemicals, iron matter, saw dust or other abrasive cleaners
to clean.
3. Clearance of deposit: minerals in water may deposit at the bottom of kettle,
which will influence the usability of the kettle. So periodical descaling is needed.
Please use detergents according to its instruction. Or according to the following
methods with white vinegar.
a) Fill the kettle with 3 cups of white vinegar, and then add water until it is over
the deposit in the kettle, and allow it to stand overnight.
b) Empty the solution from the kettle. Fill the kettle with clean water to the
maximum level, discard after boiling. Repeat for several times until there
is no taste of vinegar.
4. When the kettle is in storage or not in use, do not fold the power cord.