Wilfa THS-2000, Инструкция по эксплуатации

Страница: 29 / 30

body.
view 3
view 4.
5-OPERATION
The appliance is switched on by means of the pull chain Switch, when you are
pulling the switch, at the same time you can choice the power settings by
reading the figure “0”, “1”, “2” from the little window of the heater body, one
figure occurs after each pulling, and they occur in the turn of 0, 1, 2, 1, 0.
And in the full turn each figure means below:
0, means the heater off,
1, means the upper heating tube element on and the power 1000W,
2, means the two heating tube elements on and the power 2000W,
1, means the lower heating tube element on and the power 1000W,