![Wilfa SQUEEZY JEB-800S Скачать руководство пользователя страница 41](http://html1.mh-extra.com/html/wilfa/squeezy-jeb-800s/squeezy-jeb-800s_operating-instructions-manual_981448041.webp)
7
Engelsk
P.
7
Engelsk
7
English
P.
Attention before use
NOTE: This machine is equipped with a safety unit, so if the handle is not in position on
the cover or the cutter part is not fixed in place, the motor will not start in order to ensure
the safety of the user.
1. When disassembling or assembling the juicer, hold the top of the pusher
bar with your hand, then force the handle in or out of the slot.
2. Remove the cover then raise the middle ring by holding the juicing nozzle
with your hand, and lift up.
3. In order to avoid damage, before using, check the power supply and that
it is in compliance with the rating label.
4. Clean all parts except the main body (see maintenance and
cleaning section).
5. Before assembling, please read the parts and contents section carefully.
Usage
1. Before usage, please make sure that the button switch is set to “0”.
This will avoid starting the main machine if assembly is not completed,
thus avoiding unnecessary injury or damage to persons or property.
2. Before juicing, first make sure that the strainer is set in the correct
position, with no direct contact between strainer and transparent cover.
Put on the transparent cover, secure the handle in the slot, and then turn
on the machine.
3. In order to use, assemble according to the diagram in “Parts and
contents”. Plug the cable into a wall socket, turn the switch on and let
the machine run without load for 5 sec. Put prepared vegetable or fruit
into the feeding chute and press gently down with the food pusher.
NOTE: When pressing food with the food pusher, force must be even or indirect.
Pressure must not be more than 1 kg and do not use sudden force as the juicing effect
will be reduced.
Operating time
This machine is designed with button switches marked O, I and II
(O for stop, I for low power, II for high power).
For juicing, select high power, operate for 1 min, stop for 1 min, then repeat.
After the above operation has been performed three times, stop for
15 minutes. Do not operate until the motor is cooled, as in this way the
service life of this machine will be prolonged.
Содержание SQUEEZY JEB-800S
Страница 2: ......
Страница 44: ...AS WILFA Industriveien 25 1481 Hagan Norway wilfa com WJE 400S JEB 800S_20_01...