Warm steam
Humidity
Steam volumn
Ionizer
Timer
On/Off
●
Plug to the socket
●
On/Off:
Press key and the unit is on and will start working.
●
Timer:
Timer or no-timer function for your choose by pressing this key.
Timer settings can be from 1-12 hours
●
Ionizer:
Ionizer on by pressing this key, Turn off by press the key again
●
Steam volumn:
Steam can be adjusted into 3 levels by pressing
the key Steam
volumn into desired level.
●
The machine will be in level 3 automatically when you turn on machine
●
Humidity : Humidity can be increased from 40% to 80% at every 5%
●
Machine will check room humidity automatically when you turn on.
●
Constant humidity: The machine will control humidity automatically when set
to a certain humidity percentage.
●
Humidity levels at 45%-60% are seen as comfortable zone.
●
Warm steam: With this setting on the unit will keep the steam hot
automatically.
●
When Red Waterless indicator is on, please refill the watertank.
●
The functions of the remote control is the same
Cleanness & Maintenance
●
Before cleaning. Turn the unit "Off” and disconnect the plug from the socket.
Water filter
●
Water filter should be replaced once a year. Can be bought separate.
Transducer
●
If you have hard water in your area the transducer may build up scale formation.
Rinse with water and vinegar (0,5l water and 2 tablespoon vinegar) and let it soak
from 2 – 5 minutes. Then rinse with water.
Water bay on the unit
●
Take out the water in bay. Clean the scale by brush, then wiped by damp cloth.
●
Rinse it with water only.
