Troubleshooting
When this device is malfunction, please check with the following methods. If the problem still exists,
please contact the dealer, guarantee unit or directly contact our company.
The manufacturer reserves the right to make technical changes.
Manufactured and imported for Wilfa.
According to Waste of Electrical and Electronic Equipment (WEEE)
directive, WEEE should be separately collected and treated. If at any
time in future you need to dispose of this product please do NOT dispose
of this product with household waste. Please send this product to WEEE
collecting points where available.
Problems: Possible
Causes:
Troubleshooting:
The finished
system does not
work when turning
on the touch switch
＊
The pins of machine plug and socket
are loose
Replace the socket on time
＊
The voltage does not meet the standard
of input power
Verify the voltage of power is 230V
＊
The bean cup is not fully seated and the
degree is not adjusted
Install the bean cup again and adjust
the degree rightward
＊
The power cup is not fully seated
Install the powder cup to the position
＊
The grinding time is not set, the timer
knob points to “0”
Rotate the timer knob to set grinding
time
＊
The motor fuse is fused for overloading
Contact your dealer or technician to
repair or change the machine
Large noise, no
bean feeding, no
powder produced
＊
The grinder gets stuck
Turn off the machine and clear out the
coffee bean, then verify if there is any
hard matter mixed in coffee bean or any
damaged component
