56
Fig.3.36:
Light
through
steam, the circuit. You see
the series resistor (above on
the right side), the jumpers`
and the white LED (below
on the right side), the longer
connection wire (+) of the
LED on the right side
Prepare the steam engine model as described in chapter 2.4. The pulley
wheel of the generator and the steam engine model are connected with the
transmission belt. For each steam engine model you choose the transmission
in a way that the small pulley wheel on the shaft of fly wheel of the steam
engine model is connected through the transmission belt with the pulley
wheel of the axis of the generator.
Note: Using a higher transmission towards the generator
–
working with
more powerful steam engine models
–
does harm the generator and the
electronic, because the rotational speed is too high and the voltage at the
generator can become more then 10V.
Connect the cables of the generator with the crocodile clips. Do not connect
them straight away to the circuit on the bread board. Start the steam engine
model and wait till its touring properly. Now connect the generator to the
circuit of the bread board.
Fig.3.37: The diagram of the
circuit: light through steam
D
4
L
E
D
w
h
it
e
Содержание D100E
