Wildtronics 2021, Инструкция по эксплуатации

Страница: 7 / 16

Outward facing mic in Mic Tube.
Assembled & at mic focus
Sleeve Use Table
Microphone Diameter Sleeve Needed
18 -19.5 mm Thick - Clear
19.5 - 22.5 mm Thin - Clear
22 - 26 mm No Sleeve Needed
Using mic Adapter Sleeves:
To adapt to a number of different microphone diameters, Wildtronics uses
adapter sleeves that fit over the microphone and into the Mic Tube. Select
the adapter you need from the table below. When using the thick sleeve, it
6
is easier to insert the sleeve into the Mic Tube first then to place it on the
microphone. When using a mic pointed towards the dish, be sure that the
sleeve does not extend into the slots, of the Mic Tube past the F1
position. Align the slot in the sleeve 90 degrees from the thumb screw for
best clamping.
Inward pointing mic sleeve install