Wildtronics 2021 Скачать руководство пользователя страница 12

The Wildtronics parabolic microphone is warranted for 1 year against 
manufacturer defects and limited operational problems when used under 
normal conditions. Wildtronics will try to resolve any problems. No part 
of the microphone will be covered under warranty if the microphone was 
pointed towards a heat source or the sun, or stored at over 200/93° F/C, 
as this is a user error that will cause damage to the microphone.  

Warranty:

This product has been manufactured and tested to the highest quality 
standards by Wildtronics, LLC. This Limited Warranty offered by 
Wildtronics, LLC covers defects in material or workmanship in new 
Wildtronics, LLC products. This warranty extends to the original 
purchaser only and is non-transferable. Only consumers purchasing 
Wildtronics, LLC products from authorized Wildtronics, LLC retailers, 
Wildtronics, LLC distributors, or through the Wildtronics, LLC website 
may obtain coverage under our limited warranties.

What is covered? Wildtronics, LLC warrants this product against defects 
in material or workmanship as follows: Wildtronics, LLC will replace at 
no charge parts, or at its option, replace any assembly of the product that 
proves defective because of improper workmanship and/or material, 
under normal use, service and maintenance. If repair is not practical, with 
consensual agreement, Wildtronics, LLC may elect to refund the 
purchase price in exchange for the return of the product.

How Long Does The Coverage Last? Our warranty period is 1year from 
the documented date of purchase.

What Our Warranty Does Not Cover? Our warranties do not cover any 
problem that is caused by:

A. Conditions, malfunctions or damage not resulting from defects in 
material or workmanship.

B. Conditions, malfunctions or damage resulting from normal wear and 
tear, improper installation, improper maintenance, misuse, abuse, 
negligence, accident or alteration. In the specific case of the Parabolic 

corrode the battery holder connections. If you need expendable parts such 
as windscreen replacements, contact Wildtronics, LLC for service part 
pricing and availability.

11

Содержание 2021

















Отзывы: