Instruction Manual
(Ref. 863NRG-S; rev.20151029)
WildSpy Camera Outdoor Products
No Red Glow Infra-Red Black Flash Scouting Camera
Model No: AC-863NRG-S
Thank you for purchasing the
WildSpy Camera
product. This No Red Glow Infra-Red Black Flash WildSpy Cam has been designed for wide range
applications such as Animal trail, Hunting trial, Home security, Warehouse monitoring as a surveillance device. It provides great illumination up to 50 feet
with internal true
black flash
w/o visible grow to avoid spooking animals or thief
.
The
Rapid-Pulsing Infrared Technology
helps to brighten for higher
quality pictures and videos with lower power consumption. It will be triggered by any movement of live animals or human in a location, detected by a sensitive
Passive Infra-Red (PIR) motion sensor, and take a capture instantly within almost a second. It is built-in with a 8M pixels high-resolution digital camera with
many benefits of advanced features and newest technology for maximize your scouting efforts and more easily operation. To help achieve this, the controls are
divided into two sections, Digital Camera Control section and Motion Sensor Control section. Setting and operating with the upper portion for the digital
camera is similar to be operated as many traditional digital cameras that you are already familiar with.. The 2.4
’
color screen on top allows you to program for
many camera options and view pictures in the field. Another small LCD on the lower displays all scouting settings directly and monitor the current scouting
status, event counts, as well as battery life. The buttons in lower portion are used corresponding to each scouting options change individually. It is also support
external wireless NRG-IR boosters (referred to our IR booster series
IRX-22BW
) to increase much illumination depend on a number of boosters to be
configured.. The product is specially designed for outdoor application and is resistant against water and snow.
1 Features:
•
Built-in Rapid-Pulsing High Power Black (Invisible) IR-flasher for a great illumination within 50 feet
•
Taking Up to 8 Mp high quality pictures and up to 90 seconds 720P HD video clip
•
All video clips with natural audio sound.
•
1second Fast Capturing Time when a motion is sensed at FAST mode.
•
Hunting Diary / Voice Diary Memo recording
•
Date and Time Stamp on each picture and video
•
Built-In 2.4 inch Color Screen for field viewing
•
Programmable Time Lapse Capturing
•
Two modes for extending long battery life and Turbo snap mode (Fast shot )
•
Card Slot support
32G SDHC
SD card
•
Auto switching IR- cut filter for taking true color of day time pictures and videos
•
Motion detect activity selection: DAY
–
NIGHT
–
24 HOUR
•
Video length option: 3 ~ 90 seconds.
•
TV output support NTSC and PAL TV
•
USB port for downloading images to computer and firmware upgrade
•
External Solar Powered port support external Solar Power Pack system (Model:SO6-6W-9V
)
•
Separated LCD screens and keys to simplify setting for camera and motion sensor controls
•
Pause setting options: 0,1,3,5,10,20,30,60,90 minutes
•
Quick Shot mode allow for more detections up to 3 pictures.
•
Burst Mode for up to 5 rapid shots in one event
•
Motion Sensor Radar Animation for Sensor ON- activity status
•
Memory Full Indicator
•
Video mode Indicator
•
Walk-Test light for Distance and setup mode
•
Dial for adjusting sensitivity of motion sensor
•
Back light for scouting LCD viewing.
•
Battery Powered: D cell x 6pcs (Internal batteries will work as back up source while using external Solar Power Pack: Model:SO6-6W-9V
)
1-1
Accessory Included
•
USB Cable x1 pc
•
AV Cable x1 pc
•
Belt x 1 pc
•
Lens Hood x1 pc
•
Main unit x1 set
1-2
Optional Accessory
Metal Mount Bracket x 1 pc
U bar x1
2
QUICK VIEW
Carefully read this instruction manual before operating device.
2-1 Preparation
1. Push the Main Power Switch to OFF (Center). See Fig.1
2. Install 6 pc D type Alkaline batteries to the compartment. It is not required if you
just prefer to work under non-battery mode after using an External Solar PW
system.
3. Install a SD card and be careful to insert the SD card according to direction
shown on the card and the printing on the inner panel. before replacing a SD card,
be sure the PW switch is already at OFF position in order to avoid the data in the
card might be flushed. accidentally.
4. Remove the protective PE sheets from the IR lens; Camera lens and PIR
(motion sensor ) fresnel lens.
