Wilding Wallbeds PARK CITY, Руководство пользователя

Страница: 7 / 27

Step 3-A:
Install required Springs in the Lift Mechanisms
The required number of springs in the Lift Mechanisms varies with the different weights of
mattresses. If you purchased your mattress with your bed from Wilding Wallbeds refer to the
chart to the right. This will also be a good reference point for mattresses not purchased with
your Wall bed.
HELPFUL HINT: Watch how to do this step at:
Install a spring into hole 5 by hooking one end of the spring into the hole on the Upturned edge of the mechanism plate
first then manipulate the Lift Arm back and forth slightly while placing the other end of the spring in the Tension arm into
the corresponding hole. Now place a spring into the following holes in this order 4, 3 then into holes 6, 7. You will need a
total of 5 springs installed for a queen size bed.
Queen
Size Bed
Full
Size Bed
Twin
Size Bed
Upturned edge
of mounting
plate
#1
#9
Tension Arm
#5
Hole
#2
#3
#4
#6
#7
#8
Lift
Arm
Install a spring into hole 5 by hooking one end of the spring into the hole on the Upturned edge of the mechanism plate
first then manipulate the Lift Arm back and forth slightly while placing the other end of the spring in the Tension arm
into the corresponding hole. Now place a spring into the following holes in this order 4, then into holes 6. You will need a
total of 3 springs installed for a full size bed.
Install a spring into hole 5 by hooking one end of the spring into the hole on the Upturned edge of the mechanism plate
first then manipulate the Lift Arm back and forth slightly while placing the other end of the spring in the Tension arm into
the corresponding hole. You will need a total of 1 spring installed for a twin size bed.
Page 5
https://youtu.be/2C_Exc_pO-8
Or use the camera on your
phone to view this step.
Hardware needed for next step:
(From box labelled SBLM)
Spring end hooks in opposite direction
Bed Size Number of Springs
Queen
Full/Double
Twin/Single
5
3
1