Wilding Wallbeds PARK CITY, Руководство пользователя

Страница: 18 / 27

Important note: It is critical to orient the Bed Face panels and the Mattress Rails in the next 5 steps correctly. All of the render-
ings (drawings) in the next 5 steps assume that you are looking away from the wall you just installed the Bed Cabinet against
in the previous step. There is a note under each of the following renderings indicating “your bed cabinet installed on this side”
which indicates that is where the Bed Cabinet is in relation to the face panels and rails.
Your bed cabinet is installed on this side
Step 16:
Locate the Front Panels and
lay them on the floor FACE DOWN
(finished side). Position them in
front of where the Bed Cabinet was
installed in the last step and leave
enough room to work around them.
Note that the holes for bed handles
are in the two outside panels and are
arranged more away from the wall the
Bed Cabinet is installed against.
Holes for
handle
Holes for
handle
Head/Foot Rail
Inner Side Rail
HELPFUL HINT: Side Mount beds
can be slept on in either direction.
The rails referred to as “Head/Foot
rail” (identical) can act as either the
head or foot of the bed, depending
on which way a sleeper lies.
Step 17:
Arrange the Mattress
Rails on the face panels as shown.
Head/Foot Rail
Your bed cabinet is installed on this side
Outer Side Rail
Outer and Inner Side Rails are
identical pieces. In these instruc-
tions they are listed as Outer or
Inner to identify their location on
the Face Panels.
Holes for
handle
Holes for
handle
Page 16