Wildfire HE900, Инструкции пользователя и правила безопасности

Страница: 5 / 29


5
INSTALLATION TYPE A
These diagrams detail the installaon of the appliance into a standard 16” x 22” opening.
This method of installaon is suitable for both Class 1 and Class 2 installaons.
This installaon requires a 900 STANDARD MANTEL. For crical dimensions see page 8.
The 900 FIXING PLATE supplied is firmly
aached to the builders opening aer
the hearth has been installed. Screws
and rawl plugs are provided for this
purpose. For minimum hearth
requirements see page 8.
Using mortar or fondue around the
inside edge of the plate/builders
opening this 900 FIXING PLATE should
be sealed and fixed into place as if it
were a marble back panel. It is
important that no leakage should
occur. See further details on page 14.
Furthermore a suitable high
temperature masc should be used to
further seal around the outside edge of
the 900 FIXING PLATE and the wall.
The TYPE A INSTALLATION is
completed by installing the 900
STANDARD MANTEL
to the wall
securely. The mantel should be centred
around the FIXING PLATE.
The crical dimensions of the 900
STANDARD MANTEL are detailed on
page 8. These crical dimensions
ensure that the front trim plate of the
fire and the front face of the mantel
are aligned.
The front trim plate of the appliance is
fully adjustable with four independent
magnets. These magnets can be
screwed in or out to posion the front
trim plate correctly. This adjustment is
provided as there may be some
variaon in the wall flatness and level.
See page 17 for full details regarding
front trim installaon and adjustment.
Ensure the hearth is set level before connuing with
the installaon. Failure to install a level hearth could
affect the installaon of the mantel and appliance.