OPTIMUM OVAL ABOVE / IN-GROUND POOL
Section 1
Step 14 - Installing Top Coping (continued)
14.7
For pools that are installed into a hillside and will utilize
both
2” PVC top coping
and CP2 coping
as illustrated
below, there is a transition kit available (#77268). This kit
includes two stainless steel plates to cap off the ends of the
CP2 coping to give a finished edge.
Bend the lower tab on the end plate slightly more than 90
degrees as seen in Figure 14.7.
Attach
the
end
plate
with
#10
x
¾”
Tek screw (#99-0090)
through the CP2 coping and into the coping adaptor clip
(#77176). Repeat on the opposite end.
14.7
14.8
CP2 END CAPS
#77268
48
Содержание Optimum Pool 95-0771
Страница 1: ......
