Wilbar Optimum Pool 95-0771, Общее руководство по инструкции

Страница: 44 / 61

OPTIMUM OVAL ABOVE / IN-GROUND POOL
Section 1
Step 11
–
Create Pool Cove and Base
11.1 Using neutral alkalinity sifted earth, or fine sand without
pebbles, create pool cove 4”-6” high along entire inside
perimeter of pool. THIS IS NOT AN OPTIONAL STEP
See Figure 11.1. The cove will prevent the liner from
distending beneath the pool wall once filled with water.
Since chemicals in the ground can cause discoloration or
corrosion, we suggest laying polyethylene plastic sheeting
under the cove around the perimeter of the wall, ensuring
that no earth comes in contact with the metal. Since the
presence of such chemicals is beyond the control of the
manufacturer, this damage is not covered by the warranty.
DO NOT USE ANY SUBSTANCE WITH HIGH
ALKALINE OR ACID CONTENT, ESPECIALLY PEAT
MOSS, AS IT WILL CORRODE METAL PARTS.
Use remaining sand to create 2” deep sand base over the
entire pool area to protect the liner.
Rake and tamp whole area until it is level and smooth. Any
remaining bumps or ridges will be evident under the liner.
2” SAND BASE
SAND COVE
4”– 6” COVE
11.1
11.2
42