Wilan LIBRA 5800 AP, Руководство пользователя

Страница: 93 / 156

Libra 5800 field installation
June 2003 Rev 0 93
Libra 5800 installation procedure
Installing the CPE requires assembling the mounting hardware, finding a suitable mounting location,
configuration, and then a link test to check the RF link integrity.
Libra 5800 assembly diagram.
➧
Mounting the Libra Unit
1. Mount the clamps without the Libra unit to the pole or wall as required. The versatile mounting
hardware can be used with large diameter and small diameter poles or as a wall mount.
Additionally an optional knuckle is provided that allows for both pan and tilt functionality while the
mounting clamp is firmly fixed to the pole or wall. See
Hardware , page 20 for detailed diagrams of
the mounting hardware.
2. Connect the four pointed star bracket to the unit. Assemble the mounting kit. Ensure that this
connection is in the right direction so that the antenna polarization is as specified in the network
plan for the CPE and RD units and that the connectors are on the lower side of the unit when
mounted to the clamp.
NOTE: IF YOU NEED HORIZONTAL OR VERTICAL POLARIZATION. MOUNT THE LIBRA
ACCORDING TO THE POLARIZATION STICKER LOCATED ON THE BACK OF THE
ANTENNA.
3. For the AP, ER and LCPE mount the external antenna. Connect the antenna to the unit.
4. Point the antenna (Integrated or external) towards the desired location.