Wilan LIBRA 5800 AP, Руководство пользователя

Страница: 52 / 156

Configuration
52 Libra 5800 Series User Guide
Assigning Community Names
Community names are used to control Simple Network Management Protocol (SNMP) access to the
AP and CPE unit. The Public Community Name allows read-only access. The Private Community
Name allows read and write access. The factory default for the SNMP Public Community Name is
public
and for the Private Community Name it is
netman
. Any SNMP manager can access and
configure any unit on the network as long as the unit has the correct community names and Ethernet
access is enabled (see
Setting Ethernet and wireless access to the TCP/IP Stack , page 50 ).
➧
To set the public community name
1. From the Main System Menu, select
System Security
and press
Enter
.
The System Security menu appears.
2. Select
SNMP Public Community Name
and press Enter .
3. Type a new community name and press Enter . The change has been made.
! CAUTION
The default community names are public knowledge. Ensure you change
names during installation and record the name changes. If you restore
units to factory configurations, you also restore the default (public) names.