Manufactured Specifically for Each Application
Every WIKA
WMI
Series Magnetic Level Indicator is designed and manufactured specifically for each Level
Application. Careful attention is given to process conditions, most importantly the Specific Gravity, Temperature
and Pressure of the liquid to be measured.
Extreme caution should be taken before applying a Gauge to a differing application, or should the original process
conditions differ from those for which the Gauge has been designed. Please consult the factory to make sure that
the instrument can withstand and/or operate under these modified requirements.
Shipment
Special care is taken to ensure that every WIKA
WMI
Series Magnetic Level Indicator arrives complete and ready
for installation. Carefully inspect every package to ensure that it has not been damaged during shipping. If damage
is observed, immediately contact the shipping company that delivered the instrument and file a claim.
Unpacking/Inspection
Upon opening of the shipping container, carefully inspect each instrument to ensure that it has arrived complete
and ready for installation. Note that the process conditions are listed on the tag mounted at the base of the
indicator assembly. Make sure that these process conditions match the application for which this gauge is designed.
Should there be damage to The
WMI
Series Magnetic Level Indicator, try to take digital pictures if possible. Take
note of the serial number of the instrument and contact WIKA Instrument Corporation so that we can take action
to repair/replace this instrument.
Storage
Although these level instruments are manufactured for installations that are not necessarily sheltered from the
environment, care should be taken to ensure that no damage occurs from the time these instruments are delivered
to the time that they are installed or while in storage. Packaging is designed to withstand shipping and lifting. It will
not withstand continual moisture from rain or rising water. Instruments should be stored in a dry place under
shelter, if possible, in temperatures not below 32 or above 150 Degrees Fahrenheit. Objects should not be stacked
on top of these packaged instruments.
