WIKA TR57-M, Руководство по эксплуатации

Страница: 18 / 52

EN
14222243.02 08/2022 EN/DE
18 WIKA operating instructions model TR57-M
6. Faults
CAUTION!
Physical injuries and damage to property and the
environment
If faults cannot be eliminated by means of the listed
measures, the instrument must be taken out of operation
immediately.
▶
Ensure that there is no longer any signal present and
protect against being put into operation accidentally.
▶
Contact the manufacturer.
▶
If a return is needed, please follow the instructions given
in chapter 8.2 “Return”.
WARNING!
Physical injuries and damage to property and the
environment caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene,
flammable or toxic substances), harmful media (e.g.
corrosive, toxic, carcinogenic, radioactive), and also with
refrigeration plants and compressors, there is a danger
of physical injuries and damage to property and the
environment.
Should a failure occur, aggressive media with extremely high
temperature and under high pressure or vacuum may be
present at the instrument.
▶
For these media, in addition to all standard regulations,
the appropriate existing codes or regulations must also
be followed.
For contact details see chapter 1 “General information” or the
back page of the operating instructions.
Faults Causes Measures
No signal/cable
break
Mechanical load too high or
overtemperature
Replace the probe with a suitable
version
Erroneous measured
values
Sensor drift caused by
overtemperature
Replace the probe with a suitable
version
6. Faults