manualshive.com logo in svg

WIKA Mensor CPA2501, Руководство по эксплуатации

Поделиться
Скачать
WIKA Mensor CPA2501 Скачать руководство пользователя страница 28

28 

Operating Instructions - CPA2501

Air Data Test Indicator

CPA2501

6.4.2 Settings Application

The Settings App is used to set up general settings for the display. Settings parameters include 

Language, Brightness, Volume, User 1 base units, User 1 multiplier, User 2 base units, User 2 

multiplier, Barometer Units, Instrument Mode, and Configuration. Figure 6.4.2 shows these pa-

rameters as indicated when the Settings App has been chosen. As each parameter is pressed, 

an input screen will appear on the right where selections can be made.

The Settings App provides a place to change the language, display brightness, volume, user units, and 

barometer units and instrument mode. Configuration settings of the unit can also be saved within this ap-

plication plus the default configuration can be activated.

Figure 6.4.2 - Settings application

6.4.2.1 Languages
The Language parameter provides a selection of different languages. Once a language is chosen all 

words within all menus will appear in the chosen language and the radix character (decimal mark) will 

change from a dot (.) to a comma (,) depending on the language chosen.  

Figure 6.4.2.1 - Languages

Содержание Mensor CPA2501















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды