18
Operating Instructions Horizontal Magnetic Float Switch - HLS
6. Faults
The most frequent root causes and required
countermeasures are listed in the following table.
Fault
Cause
Measure
No or undefined
switching
function
Incorrect PIN
assignment
Comparison with
connection diagram
Temperature contact
defective
Return shipment to the
factory
Reed contact
mechanically or
electrically defective
Return shipment to the
factory
Magnetic float
switch cannot be
mounted at the
intended position
in the container.
Process connection of
the magnetic float
switch and container
are not compatible
Modification of the
container
Modification of the
magnetic float switch at
the factory
CAUTION!
Bodily injuries, property and environmental damages
If faults cannot be rectified with the help of the listed
measures, immediately shut the unit off.
Ensure the pressure is switched off and secure the unit against
unintentionally being switched on.
Contact the manufacturer.
If return shipment is necessary, follow the instructions in Chapter
8.2 “Return Shipment”.
