4
WIKA operating instructions transmitter, models GDT-20, GDHT-20
14063434.02 10/2019 EN/DE
EN
1. General information
1. General information
■
The transmitter described in the operating instructions has been designed and manufac-
tured using state-of-the-art technology. All components are subject to stringent quality
and environmental criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
■
These operating instructions contain important information on handling the instrument.
Working safely requires that all safety instructions and work instructions are observed.
■
Observe the relevant local accident prevention regulations and general safety regulations
for the instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood the operating instructions prior
to beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by using the product
contrary to its intended use, non-compliance with these operating instructions, assignment
of insufficiently qualified skilled personnel or unauthorised modifications to the instrument.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
- Internet address:
www.wika.de / www.wika.com
- Corresponding data sheets: SP 60.09 (model GDT-20), SP 60.14 (model GDHT-20)
- Application consultant:
Tel.: +49 9372 132-8971
Fax: +49 9372 132-8008971
