4
WIKA operating instructions, gas cylinder scale, model GCS-1
11145676.07 03/2020 EN/DE
EN
1. General information
■
The gas cylinder scale described in the operating instructions has been designed
and manufactured using state-of-the-art technology. All components are subject
to stringent quality and environmental criteria during production. Our management
systems are certified to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on handling the instru-
ment. Working safely requires that all safety instructions and work instructions are
observed.
■
Observe the relevant local accident prevention regulations and general safety regula-
tions for the instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions on to the next operator or owner of the instrument.
■
Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by using the
product contrary to its intended use, non-compliance with these operating instruc-
tions, assignment of insufficiently qualified skilled personnel or unauthorised modifi-
cations to the instrument.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
- Internet address:
www.wika.de
- Relevant data sheet:
PE 87.19
- Application consultant:
Tel.:
+49 9372/132-0
Fax:
+49 9372/132-406
E-Mail: [email protected]
Abbreviations
2-wire
Two connection lines are used for the voltage supply.
The measuring signal also provides the supply current.
U
+
Positive power supply terminal
U-
Negative power supply terminal
S
+
Positive output terminal
S -
Negative output terminal
1. General information
