background image

Calibration

WIKA data sheet CT 15.51

Page 1 of 15

WIKA data sheet CT 15.51

03/2019

Data sheets showing similar products and accessories:

Test pumps, hydraulic; model CPP series; see data sheet CT 91.05

Test pump, pneumatic; model CPP30; see data sheet CT 91.06

Calibration software; WIKA-Cal; see data sheet CT 95.10

Portable process calibrator

Model CPH7000

Portable process calibrator model CPH7000 with 

optional hand pump

Description

General information

The model CPH7000 process calibrator is a precise, portable 

calibrator for the calibration and checking of analogue 

pressure measuring instruments, pressure transmitters and 

process transmitters. Furthermore, pressure switches can 

be checked and the switching point determined. With the 

CPH7000, not only can transmitters be checked, but also 

simulated and tested.

Design

The CPH7000 optionally features an integrated reference 

pressure sensor and also a manual pressure generation, with 

which pressures of -0.85 ... +25 bar (12.3 ... +360 psi) can be 

generated. It is possible to simultaneously power an external 

transmitter via the electrical module and to measure (or also 

simulate) its output signal.

Functions

The calibrator offers the possibility to set calibration routines 

quickly and easily, but also to run preconfigured calibration 

routines and automatically save the measured values. Over 

the WIKA-Wireless interface, the completed calibration 

processes can be transmitted to a PC. This data can 

subsequently be evaluated and archived using WIKA-Cal 

software. Thus a completely paperless transmitter calibration 

is possible with just the CPH7000.

Accuracy

The CPH7000 is compensated over a wide temperature 

range of 10 ... 50 °C (50 ... 122 °F) and achieves an accuracy 

of 0.025 % of span. In order to avoid intricate calculations, 

the measured values can also be displayed directly in 

customer-specific units.

for further approvals 

see page 6 - 7

Applications

 

Calibration service companies and service industry

 

Measurement and control laboratories

 

Quality assurance

 

On-site calibration

Special features

 

Manual pressure generation of -0.85 … +25 bar 

(12.3 ... +360 psi)

 

Accuracy: 0.025 % FS (incl. calibration certificate)

 

Generation/measurement of 0 ... 30 mA and voltage 

supply DC 24 V

 

Data logger with high measuring rate and large memory

 

A calibration assistant guides you through the calibration

Содержание CPH7000
















Отзывы: