6
WIKA operating instructions EMM Calibration Sled
PN 0019408001A 08/2018 EN
EN
3. Program operation and procedures
Figure 2.4 – Linearization correction
Enter reference values and actual measured values into table. This process can be semi-automatic by selecting Live Calibration
entering the reference value then selecting the Take Reading button. A graph is updated as the points are entered. When the table
is fully populated select “Calibration” and “Save Calibration”. The linearity correction will be applied and saved.
Figure 2.5 –Linearity correction graph
Other options are available such as reducing the number of calibration points and upscale-downscale calibrations. By changing the
Number of points and selecting Update Grid fewer test points can be used.