22
11265191.10 08/2019 EN/DE
Differential pressure gauge models 712.15.160, 732.15.160, optional for hazardous areas
EN
Dismounting cable socket
The cable socket is prefitted and must be dismantled as described below.
■
Fully loosen the screws on the cable cover cap with a slotted screwdriver (0.6 x 3.5 mm)
and remove them.
■
Pull the cable cover, along with the socket insert, out from the cable socket baseplate
(joined permanently with the instrument).
■
Take the cable cover cap and push the socket insert out, downwards, completely through
the cable cap.
Pin assignment cable socket
With
multiple scales
or replaceable plug-in scales (option), the output signal of 4 ... 20 mA
corresponding to each scale can be stored in a microprocessor.
Only use cable with a diameter of
7 ... 13 mm
Screw
Cable cover cap
Cable cover
Socket insert
Cable socket baseplate
Sealings
Do not use this
terminal
Terminals 3 and 4: For internal use only
Terminals 5 and 6: Reset zero point
U
B
+/I+
+0V/GND
Evaluation
(display)
Supply
voltage
4 ... 20 mA, 2-wire
4. Commissioning, operation
