14503941.01 11/2021 EN/DE/FR/ES
4
WIKA operating instructions models TR10-0, TC10-0 (FM, CSA)
EN
1. General information
■
The instrument described in the operating instructions has been manufactured
using state-of-the-art technology. All components are subject to stringent quality and
environmental criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
■
These operating instructions contain important information on handling the instrument.
Working safely requires that all safety instructions and work instructions are observed.
■
Observe the relevant local accident prevention regulations and general safety regulations
for the instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by using the
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the instrument.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
- Internet address:
www.wika.de / www.wika.com
- Relevant data sheet:
TE 61.01 (TR10-0), TE 66.01 (TC10-0)
- Application consultant: Tel.: +49 9372 132-0
Fax: +49 9372 132-406
2. Design and function
2.1 Description
The model TR10-0 (resistance thermometer) or TC10-0 (thermocouple) electrical
thermometers are comprised of a measuring insert which is built into a certified case. In
combination with a flame path fitting that is screwed into the head, the measuring insert
functions as a flameproof joint. The measuring insert (TR10-1, TC10-1) is replaceable.
Sensor design in model TR10-0
The measuring resistor is embedded in ceramic powder, heat-resistant potting compound,
cement compound or thermally conductive paste. A welded cap forms the external shell of
the sensor tip of the measuring insert.
1. General information / 2. Design and function
