Wige CUNIMA MCU [2], Руководство по эксплуатации

Страница: 8 / 26

8
3.4 BACKFOCUS ADJUSTMENT
To ensure that you can use every lens with this camera properly,
the housing of the CUNIMA lets you adjust the backfocus.
To adjust the backfocus, please follow the instructions below:
rotate the gearwheel clockwise to increase the
backfocus
rotate the gearwheel counterclockwise to
decrease the backfocus
3.5 IRIS/FOCUS MOTOR
3.5.1 INSTALLATION
1. To use the iris/focus motor on the CUNIMA, mount it on any of the four sides of the
camera. The two threads on each side of the head of the CUNIMA can be used to fix it.
Make sure to align the gearwheel of the motor with the gearwheel of the lens properly.
2. Connect one male 7Pin plug of the Y-patch cable to the CUNIMA and the other to the
iris/focus remote module.
3. Now connect both parts with the female connector of the y-patch cable to the standard Y-
cable of the CUNIMA and establish the connection to the power supply and the RCP.
4. The green LED of the iris/focus remote module will now flash slowly. This indicates that
the remote module is ready to work. If the green LED stays is illuminated constantly
without flashing, reboot the remote module by pulling out the cable and plugging it back in.