Wige CUNIMA MCU [2], Руководство по эксплуатации

Страница: 24 / 26

24
address
GETID_ Gets the serial
address text
Special Functions:
SETAGC Adjust AGC
characteristic 0000=AGC off
XXYY=AGC on
XX=mean luma (/16)
YY=agc speed Default:
XX=28h
YY=0Ch
SVCOMP Set video
compression rate 720p
0000=6Mbit/s
0001=12Mbit/s
0002=20Mbit/s
1080i/p
0000=8Mbit/s
0001=14Mbit/s
0002=20Mbit/s Default:
0001
GVCOMP Get video
compression rate text
SSPROF Set Stream
Profile 0000=Profile 1
Program=1
SIT=31
PMT=256
PCR=4097
V_PID=4113
A_PID=4352
0001 = Profile 2
Program=2
SIT=31
PMT=257
PCR=4098
V_PID=4114
A_PID=4353 Default:
0000
6.3 REMARKS
Fixed Pattern Noise Correction:
Static FPN correction:
In order to use the static fixed pattern noise correction cover the lens and activate the FPN correction
using the FPAUTO command with the proper value. After the CAMACK the correction is done and the
lens cover can be removed. When using the FPN command it could be necessary to readjust the
blacklevel. The FPAUTO command must be executed after every change in the analog gain settings.
Dynamic FPN correction:
The dynamic FPN correction can always be activated. No covering of the sensor is required, the
dynamic fpn correction works autonomously from the analog gain settings.
AGC:
The integration time can not be changed while the AGC is running.
WBAUTO:
WBAUTO=0001activates the automatic whitebalance, which can be detected using the
$STATUS=0013 (result=1), $STATUS=0016 (result=red) and $STATUS=0017 (result=blue)
commands.
If $WBAUTO=0002 or $WBAUTO=0003 is executed, this is not really a whitebalance. It’s more
programming the standard wbred and wbblue registers with new fixed values. This can be checked by
reading the $STATUS=0013(result=0), $STATUS=0003(result=red) and $STATUS=0004
(result=blue).