WifiTrax Model Science www.wifitrax.com WifiTrax Model Science www.wifitrax.com
Link
Linked
Open
Remarks
J4 1
OUT 1 Direct
Filament Lamp
J4 2
OUT 1 475 Ohm
LED Bright
Leave open for 1K
J4 3
OUT 2 Direct
Filament Lamp
J4 4
OUT 2 475 Ohm
LED Bright
Leave open for 1K
J4 5
OUT 3 Direct
Filament Lamp
J4 6
OUT 3 475 Ohm
LED Bright
Leave open for 1K
J4 7
OUT 4 Direct
Filament Lamp
J4 8
OUT 4 475 Ohm
LED Bright
Leave open for 1K
J6 1
OUT 8 Direct
Filament Lamp
J6 2
OUT 8 475 Ohm
LED Bright
Leave open for 1K
J6 3
OUT 7 Direct
Filament Lamp
J6 4
OUT 7 475 Ohm
LED Bright
Leave open for 1K
J6 5
OUT 6 Direct
Filament Lamp
J6 6
OUT 6 475 Ohm
LED Bright
Leave open for 1K
J6 7
OUT 5 Direct
Filament Lamp
J6 8
OUT 5 475 Ohm
LED Bright
Leave open for 1K
Table 1. Link Option Settings
Links
removed
for LEDs
D1
D2
D3
D4
D8
D7
D6
D5
5- 5+ 6- 6+
7+
8+
7-
8-
Bank 2 Outputs
Cathode
Anode
Cathode
Anode
Switches Always in
ON position as
shown
Diodes must be connected
The correct way around
As shown.
Diodes must be connected
The correct way around
As shown.
1+ 1- 2+ 2-
3-
4-
3+
4+
2+ 2- 3+ 3- 4+ 4-
Bank 1 Outputs
DC Power
+ -
Figure 2. Connection Diagram for LED Lights
Using the WFG-80 Web Pages
This is the IP Address of the WFG-80 web pages when you are connected to
its wftrx_WFG80_1_XXXXXXXX_7 network. You will not be able to access
these pages until you are connected to the module’s network.
(2)
You will see the Main Menu page as below:
(3)
To test the lighting channels, click or tap the Light Channels option. You will
see the screen below. The names of each channel default to the serial
number plus the channel number as shown:
(4)
Assuming your lights are connected properly, tapping the button in
the State column will toggle the light on and off.
