Operating Manual Euromat TS 300
Page 20
Assign Program Name from provided
list.
When all baking steps are entered, exit the X
position with the arrow key.
Entering the Program Name is activated.
The complete name appears highlighted.
You can select a name from the provided list
by holding down the 0 key and move the
arrow key
= forward
= back continue
.
Important Tip:
There is an empty line in the
name list which can be used to help inputting
names with individual letters. Not required
letters therefor dont have to be deleted
individually.
Assign Program Names individualy
If the program name appears highlighted,
move the arrow key down.
Now the letters are highlighted individually and
can be changed.
Hold down the 0 key and move an arrow
key
= forward
= back continue
One after the other, all letters appear small
and in capitals, numbers and special symbols.
There is also an empty symbol for deleting
unwanted letters.
When the required symbol has been reached,
release the 0 key and go down to the next
symbol with the arrow key.
Proceed in the same way until the entire name
is entered.
u
u
t
u
t
02
10:10
Bread
P
200
02
1
X
X
190
200 ml
045
000
010 min
01
000 sec
000 min
0
u
+
