Operating Manual Euromat TS 300
Page 14
Programming with the TS Control is only possible in the Computer-Mode.
You have the following programming possibilities with the TS 300:
1.
You can make changes while a program is running.
2.
You can change existing programs as required.
3.
In the Computer you can save your own programs in unoccupied program numbers.
4.
You have 12 Product Keys for settings.
Programming
Product Key Pad = Digits
In the Programming Mode, the Product Key
Pad serves as numerical Digit Keys.
It contains the digit keys 1-9 and 0.
In addition, there are two Arrow Keys, left and
right, in the lowest row.
( 10
and 12 Cursor Key).
t
u
1
4
6
8
5
2
3
9
0
7
t
u
Changes while a Program is
running.
You can make changes with the Manual Input
Key while a program is running.
These are once-off changes which are not
saved when the program is finished.
1.) Press the Manual Input Key while the pro-
gram is running.
The LED lights up.
2.) The screen shows the actual parameters.
The actual program continues unaffected.
If you do not press a key for 30 seconds, the
Change Mode will stop.
Changes in an already completed step have no
affect on the running of the program.
3.) The Cursor points to the actul step.
02
10:10
Bread Rolls
P
210
02
1
2
X
180
200 ml
045
180
010 min
01
000 sec
005 min
