All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
34
5.0. Demounting
5.3. Stowing the hydraulic lines
Hook the hydraulic lines into
the holder (A).
5.4. Removing the universal drive shaft
Pull the bracket (A) upwards
and pivot it forwards by
approx. 45° to the nearest
engaging point.
Place the universal drive
shaft into the pivot-mounted
bracket for storage (see
image).
5.5. Securing the chassis
Pivot both running wheels (A)
backwards.
Raise the locating pin (B)
slightly and pivot it to the
left.
The locating pin (B) must lock
into the wheel yoke hole.
